Transformer for Low Voltage Halogen lamps
Lamp life and light efficiency of halogen lamps strongly depend on designed voltage, so design rule so as to grant in between balance, output voltage 11.5V thus produce average lamp life 180% and 80% of light efficiency. Electronic transformer compare to magnetic transformer are reduce weight and small dimension with possible energy saving by dim option. Their grant a very reliable operation low losses, soft start, provider with an electric device which cuts-out automatically in case of short circuit or overload and resets after the failure have been removed.It is possible to vary the light output by using a specific dimmer to be installed in series on mains supply cables either leading edge dimmers or trailing edge dimmers.
DC transformer for TD & circular fluorescent 20W & 22W lamp 12V and 24V can be operate with battery power for wide application on there have not city power situation.


 
Transformer for Halogen

Soft Start Circuitry
All models of Spire low-voltage transformers utilize a soft start circuitry to maximize lamp life.
The soft start circuit ramps up the lamp filament voltage slowly when the lamp is cold.

Electronic Short- Circuit Protection
Spire low-voltage transformers employ Electronic Short Circuit and over load Protection.
The sensing circuit will instantly shut down the output before any of the components are stressed if a short circuit or over load is detected.
The transformer will automatically reset as soon as the fault is corrected.

  • High Reliability
  • Moisture Resistant
  • Emits No Audible Noise
  • Low Harmonic Distortion
  • High Power Factor
  • Lightweight, Vompact Design
  • Small Case Size 105x39x26mm
  • Works with most commercially Dimmer
  • RFI<30m Hz EN 55015
  • Harmonics EN 61000-3-2
  • Safety EN 61040:94 A:96